Can I use a 10-speed chain on an 11-speed cassette?

By Crankworthy · Published · Updated

No

No. An 11-speed cassette has its cogs packed closer together, and a 10-speed chain is too wide to sit cleanly between them — expect noisy, unreliable shifting and faster wear. Use a chain rated for the cassette's speed count.

The numbers

Cog spacing, Shimano 10-speed3.95 mm
Cog spacing, 11-speed road3.74 mm
Cog spacing, 11-speed mountain3.9 mm
Cog thickness, 10 and 11-speed1.6 mm

Where on your bikeChain and cassette, at the rear wheel

Room for the chain between cogs, 10-speed against 11-speedThree cogs of each cassette to scale. 10-speed cogs are 3.95mm apart, leaving 2.35mm between 1.6mm cogs; 11-speed road cogs are 3.74mm apart, leaving 2.14mm.Room for the chain (to scale)10-speed: cogs 3.95 mm apart2.35 mm2.35 mm11-speed road: cogs 3.74 mm apart2.14 mm2.14 mmSame 1.6 mm cogs, less room between them.
Grey bars are cogs seen edge-on; the amber gaps are where the chain runs. Spacing from Sheldon Brown’s cassette spacing crib sheet (10-speed) and BikeGremlin’s cassette compatibility guide (11-speed).

Why

Each extra speed squeezes the cogs closer. Shimano 10-speed cogs sit 3.95mm apart [1]; 11-speed cogs 3.74mm on road cassettes and 3.9mm on mountain ones [2]. The cogs stay 1.6mm thick [2], so the room left for the chain shrinks.

Chains are made narrower as speed counts rise, to run in that smaller space. A chain built for 10 cogs is slightly too wide for the gaps on an 11-speed cassette, so it rubs the neighbouring cog and hesitates on shifts.

The rule is simple and applies in both directions: the chain's speed rating should match the cassette. When you change the cassette's speed count, the chain changes too.

How to tell what speed your chain is

Check the side plates
Most chains are printed with the model, such as "KMC X11" or "CN-HG601" — the model name usually tells you the speed.
Count your cassette
Count the cogs on the rear cassette. That number is the speed count your chain needs.

Skip

Don’t buy: a 10-speed chain for an 11-speed cassette
Instead: an 11-speed chain, like the ones below.

Bikes this applies to

From our research, these bikes come with an 11-speed cassette — a replacement chain for any of them should be 11-speed.

11-speed chains

Recorded in our catalog as 11-speed.

Prices were last checked when the catalog was built and can change at any time. Retailer links are affiliate links; we may earn a commission at no extra cost to you.

Sources

  1. Sheldon Brown — Frame and Cassette Spacing Crib Sheet
  2. BikeGremlin — Bicycle cassette compatibility

Related

Not sure this fits your bike?

Describe your bike in plain language and Crankworthy works out what it currently has, which upgrades actually fit, and the full parts and tools list — checked component by component.

Check compatibility for your bike